LC-22DC30M
5 – 3
5. Signal adjustment
5.1. Signal check
Confirmation of signal from generator (setting to spec level)
5.1.1 Adjustment Mode
5.1.2 Component 15K 50Hz signal adjustment (COMP-SD)
5.1.3 Component 33K 60Hz signal adjustment (COMP-HD)
5.1.4 PC (ANALOG RGB) signal adjustment (PC-RGB)
•
PAL Composite signal :
0.7Vp-p
±
0.02Vp-p (Pedestal to white level)
•
15K Component signal (50Hz) :
Y level:
Pb, Pr level:
0.7Vp-p
±
0.02Vp-p (Pedestal to white level)
0.7Vp-p
±
0.02Vp-p
•
33K Component signal :
Y level:
Pb, Pr level:
0.7Vp-p
±
0.02Vp-p (Pedestal to white level)
0.7Vp-p
±
0.02Vp-Com
Adjustment item
Adjustment conditions
Adjustment procedure
1
Adjustment mode
1) Press the test key at the test remote control.
Adjustment item
Adjustment conditions
Adjustment procedure
1
Adjustment
[Signal]
COMP 15K 50Hz (576i)
100% Full-field Colour Bar
[Terminal]
INPUT 3 COMPONENT
Feed the COMPONENT 15K 50Hz (576i) 100% Full-field Colour Bar signal (100% colour
saturation) to INPUT 3 COMPONENT terminal.
2
Auto adjustment
performance
Process Mode page 4
(COMP SD)
1) At the related page, move cursor to [COMP SD ADJ], press ENTER.
2) [OK] appears when finished.
Adjustment item
Adjustment conditions
Adjustment procedure
1
Adjustment
[Signal]
COMP 33K 60Hz (1080i)
100% Full-field Colour Bar
[Terminal]
INPUT 3 COMPONENT
Feed the COMPONENT 33K 60Hz (1080i) 100% Full-field Colour Bar signal (100%
colour saturation) to INPUT 3 COMPONENT terminal.
2
Auto adjustment
performance
Process Mode page 5
(COMP HD)
1) At the related page, move cursor to [COMP HD ADJ], press ENTER.
2) [OK] appears when finished.
Adjustment item
Adjustment conditions
Adjustment procedure
1
Adjustment
[Signal]
XGA 60Hz
100% Checkered Pattern
[Terminal]
PC INPUT
Feed the XGA 60Hz 100% Checkered pattern signal (100% colour saturation) to PC
INPUT.
*Please make sure SYNC is OFF.
2
Auto adjustment
performance
Process Mode page 6
(PC-RGB)
1) At the related page, move cursor to [RGB ADJ], press ENTER.
2) [OK] appears when finished.
100% white
Black
100% white
Black
