Sharp LC-15SH1M, Operation Manual

Page: 5 / 29

4
Make sure the following accessories are provided with the LCD TV set.
Supplied Accessories
Wireless remote control Operation manual
“AA” size batteries
( × 2)
AC cord
* Product shape may vary
from country to country.
pages 4 and 9 page 4 page 5
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AA” size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.
1
Open the battery cover.
2
Insert two “AA” size batteries.
3
Close the battery cover.
1 2
• Place batteries with their
terminals corresponding
to the (+) and (–)
indications in the battery
compartment.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
• If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
• Align the tab on the battery cover (
1
) and place
it while pressing the tab (
2
) to close it.
Using the Remote Control
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use of the remote control
• Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
• Do not install or place the remote control under direct sunlight. The
heat may cause deformation of the unit.
• The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.
• Detach the cover
while pressing the
(
" ) part.
POWER indicator
OPC indicator
Remote sensor
OPC sensor
POWER
Preparation
LC-15SH1M
LC-15SH1X
LC-20SH1M
LC-20SH1X
Antenna cable
page 5
or
* The LC-15SH1X and
LC-20SH1X models only.
LC15_20SH1M_X_E_P01-09.p65 04.12.24, 2:22 PM 4