Sharp LC-13S2US, Service Manual

Page: 38 / 94

LC-15S2U-S
38
(5) MENU BUTTON
Selection
Default
Function
Exception Selection between "RESPOND" and "NO RESPOND" (loop provided)
RESPOND
Disabling the MENU key both on the set and the remote controller
» The MENU button is operative at a start of inspection process and public password regardless of this setting.
(See Note in (4) above.)
» The MENU button is operative all the time in the adjustment process and inspection process modes as well
as during EZ-SETUP regardless of this setting.OFF" and selection is made prohibited.
(6) ON SCREEN DISPLAY
Selection
Default
Function
Exception
Keys
inoperative
except for
default setting
Remarks
Selection between "YES" and "NO" (loop provided)
YES
"NO" setting: The on-screen display does not appear.
»
The V-CHIP block message and closed caption appear regardless of this setting.
»
The inspection process, factory setting (including the EZ-SETUP screen), adjustment process and public
mode setting screens can appear regardless of this setting.
»
Menu (MENU) [on remote controller and set] (operative when applied in the above exception, however)
»
Off-timer (SLEEP)
» On-screen display (DISPLAY)
» Closed caption
» "NO" setting:
1
The off-timer (SLEEP TIMER) setting is cleared to --.
2
The no-signal power off (AUTO POWER OFF) setting is cleared to "OFF".
3
The sound mode (SOUND ONLY MODE) setting is changed to "NO" with selection disabled.
(7) START MODE
Selection
Default
Function
Remarks
Selection between "NORMAL" and selectable input source/selectable channel (loop provided)
→
[NORMAL]
←→
[AV1]
←→
[COMPONENT]
←
→
[CH1]
←→
[CH2]
←→
···
←→
[CH69]
←→
[CH70]
←→
···
←→
[CH125]
←
*The italic-font sources and channels are not selectable depending on the setting (Note 1).
NORMAL
With the power on, an input source or channel to start with is preset.
In the NORMAL mode, the last memory comes first.
» In the "NORMAL" setting, the "INPUT MODE FIXED" setting is forced to "VARIABLE", which does not allow
the selection.
(Note1:)
»
With the channel set at AIR, the channels [CH1] and [CH70] thru [CH125] cannot be selected.