Sharp LC-13B6US, Service Manual

Page: 34 / 104

34
LC-13B6U-S
LC-15B6U-S
ITEMS OF G/A ADJUSTMENT PROCESS
SETTINGS COMMON FOR LC CONTROLLERS
G/A 1 G/A TEST PATTERN OFF OFF GRADATION TEST PATTERN DISPLAY REFER TO THE TEST PATTERN OF ADJUSTMENT PROCESS MODE.
G/A DATA 00 — — ITEM OF MULTI-PURPOSE VARIABLE ADJUSTMENT FOR G/A INSPECTION NOT USED.
DEFAULT LISTS OF ADJUSTMENT PROCESS TUNER ITEMS
BASIC SETTINGS
TUNER1 AFT UP 1.80 1.80 AFT VOLTAGE REFERENCE VALUE (ALL BANDS) NOT USED.
AFT DOWN 1.20 1.20 AFT VOLTAGE REFERENCE VALUE (ALL BANDS) NOT USED.
LSYNC 1000 1000 SYNC JUDGMENT THRESHOLD (TV) NOT USED.
HSYNC 1048 1048 SYNC JUDGMENT THRESHOLD (TV) NOT USED.
AVSYNC 5000 5000 SYNC JUDGMENT THRESHOLD (EXT. INPUT) NOT USED.
TUNER2 AIR SEARCH 1.600 1.600 LAST SYNC JUDGMENT FREQUENCY IN AIR CH SEARCH NOT USED.
EDS TEST 10 10 TIME TAKEN UP TO THE JUDGMENT NOT USED.
THAT NO EDS TIME DATA EXISTS (SEC.)
AFT FARTIME 50 50 CHANNEL PRESET TIME ADJUSTMENT 1 NOT USED.
AFT NEARTIME 30 30 CHANNEL PRESET TIME ADJUSTMENT 2 NOT USED.
AFT NEARMTIME 10 10 CHANNEL PRESET TIME ADJUSTMENT 3 NOT USED.
AFT 1STEPTIME 10 10 CHANNEL PRESET TIME ADJUSTMENT 4 NOT USED.
AFT CSYNCTIME 50 50 CHANNEL PRESET TIME ADJUSTMENT 5 NOT USED.
Page No. Item
Initial Value
Function
Response precautions on servicing
13B6U 15B6U (Do not change other items than designated.)
Page No. Item
Initial Value
Function
Response precautions on servicing
13B6U 15B6U (Do not change other items than designated.)
OTHERS
OTHERS1 DAC DATA ITEM OF MULTI-PURPOSE VARIABLE NOT USED.
00 000 00 000 ADJUSTMENT FOR DAC INSPECTION
L ERROR WAIT 15s 15s LAMP ERROR DETECTION WAIT TIME NOT USED.
L ERROR H TIME 1.0s 1.0s LAMP ERROR DETECTION TIME NOT USED.
AV AUTO GAIN OFF OFF AUTO-GAIN SETTING IN TV NOT USED.
TV OSD 0 0 DISPLAY POSITION SETTING IN OTHER CASE THAN CARD NOT USED.
NTSC PWM FREQ 01A3 01A3 BRIGHTNESS FREQUENCY SETTING NOT USED.
NTSC PWM DUTY 0 0 BRIGHTNESS DUTY SETTING NOT USED.
PAL PWM FREQ 015E 015E BRIGHTNESS FREQUENCY SETTING (50 HZ) NOT USED.
PAL PWM DUTY 0 0 BRIGHTNESS DUTY SETTING (50 HZ) NOT USED.
OPC THRESHOLD 24 24 INPUT LEVEL THRESHOLD FOR TRANSITION FROM NOT USED.
BRIGHTNESS SENSOR STOP MODE TO OPERATION MODE
HOTEL POWERFIX OFF OFF SETTING FOR USE OF POWER-ON FIXED IN HOTEL MODE NOT USED.
COMP SYSTEM AUTO AUTO SELECTION OF COMPONENT SIGNALS IN ADJUSTMENT PROCESS NOT USED.
REMOTE CONTROL CODES ARE INDICATED AT THE BOTTOM.
OTHERS2 CLOSED CAPTION 15 15 CLOSED CAPTION THRESH LEVEL NOT USED.
CCD ISO 16 16 CLOSED CAPTION PHASE SETTING NOT USED.
EZ SETUP ON ON PRESENCE OR ABSENCE OF EZ SETUP NOT USED.
DEFAULT LISTS OF ADJUSTMENT PROCESS OTHER ITEMS
Page No. Item
Initial Value
Function
Response precautions on servicing
13B6U 15B6U (Do not change other items than designated.)