Sharp KS-R19S, Service Manual

Page: 6 / 23

6
1. Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.
2. Upside down the outer pot and disconnect the lead wires from the micro switch.
3. Remove the screw holding the micro switch to the switch leg ass’y.
4. Now the micro switch is free.
REMOVE OF MICRO SWITCH
1. Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.
2. Remove the screw holding micro switch to the switch leg ass’y.
3. Pull the stop ring holding the switch leg ass’y to the thermostat rod.
4. Remove 2 screws holding the switch leg ass’y to the outer pot.
5. Now the switch leg ass’y is free.
Note : When mounting the switch assembly, lock it in a manner that the switch button will not come in contact
with the panel.
REMOVE OF SWITCH LEG ASSEMBLY
Thermostat ass’y
Outer pot
Switch leg ass’y
Thermostat rod
Stop ring
Screw
Fig. 4.
1. Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.
2. Fixing the thermostat rod, pull the stop ring by using the plier and straightening 2 claws of thermostat.
3. Remove thermostat from the outer pot. Fig . 4.
4. Now the thermostat ass’y is free.
REMOVE OF THERMOSTAT ASSEMBLY
Fig. 3.
Micro SW.
Screw
Switch leg ass’y
Blue lead wire
Blue lead wire
Yellow lead wire
Red lead wire