6
Model
KL-611TBMH-UK
KL-611TBMH-CH
KL-611TBMH-EU
Supply voltage 220-240 V 50Hz
Lamp power
(W)
7 W
Motor power
(W)
210 W
Flow rate
(m³/h)
548
Insulation
Class
CLASS I
2 Technical Specifications
Consumer Services
Safety Information to Be Observed
During Transportation and Shipping
Your device must be kept in its original package
to protect from damage during transportation and
shipping.
Keep the product in normal position during
transportation. Do not drop the device during
transportation and protect it against impacts.
Damages and faults that occur during transportation
after the delivery of the appliance to the customer
are not covered by the warranty.
Liability Limitation
All technical information, instructions of use,
information on the operation and maintenance of
the device provided in this manual includes the
latest information regarding your product. Sharp
does not take any responsibility for damages and
injuries that might be caused due to not observing
the instructions in this user manual, using the device
outside its intended use, unauthorized repairs or
modifications on the device and using spare parts
not provided by Sharp.
General Information
This Operating Manual has been prepared for Sharp
cooker hoods.
This cooker hood is designed for use over a cooker.
Make sure that your wall can stand the weight of your
cooker hood. Processes such as breaking, cutting,
etc. to be performed on the wall or closet during
assembly must be borne by the user. Your cooker
hood is suitable for use with a flue system, or flueless
use (by using a charcoal filter). Before starting the
assembly, pay attention to the problems you may
encounter during assembly. Assembly must be
carried out by a trained, specialized and authorized
person.
•
Specifications of the device and this manual may
be modified without prior notification.
•
Complies with the AEEE Regulation.
This product complies with the 2004/108/
EC (Regulation on Electromagnetic
Compliance) and 2006/95/EC (Regulation
on Low Voltage Devices (LVD)) Directives.
This device complies with the Directive
on the Control of Waste Electrical and
Electronic Equipment.
