Sharp KH-9126CT00-EU User Manual Download Page 11

11

Safety switch off function:

Every cooking zone will be switched 

off after a defined maximum operation 

time if the heat setting is not modified. 

Every change in the cooking zone puts 

the maximum operation time back to 

the initial value of the operating time 

limitation. The maximum operation time 

depends on the selected temperature 

level.

Wait until ‘F’ disappears for all 

zones,turn the hob on by touching  

 

and continue to use.

Heat setting

Safety switch 

off after

1 - 2

6 Hours

3 - 4

5 Hours

5

4 Hours

6 - 9

1,5 Hours

Child Lock:

The child lock function can be activated 

after switching the control on. To 

activate the child lock, simultaneously 

operate the front increase heat setting 

key 

 and the decrease heat 

setting key  

 and then operate the 

increase heat setting key  

 again. 

"L" meaning LOCKED will appear in 

all heater displays and the control can 

not be changed. (If a cooking zone is 

in the hot condition, "L" and "H" will be 

displayed in alternation.)

The hob will remain in a locked 

condition until it gets unlocked, even if 

the control has been switched on and 

off.

To deactivate the child lock, first switch 

the hob on. Simultaneously operate 

the front increase heat setting key 

  

and the decrease heat setting key  

 

and then operate the decrease heat 

setting 
key 

 again. "L" will disappear in the 

display and the hob will be switched 

off. 

Key Lock

Key lock functionality is for blocking 

and setting the appliance into 

safe  mode during operation. Touch 

modifications as, for example, rise 

heat settings and others should not be 

possible. Only switching the appliance 

off is possible.

The lock function becomes active if 

the Key Lock button 

 is pressed 

for at least 2 seconds. This operation 

is acknowledged by a buzzer. After 

a successful operation of more than 

2 seconds, the Key Lock Indicator 

flashes and the heater becomes 

locked.

Timer function :

The timer function is carried out in two 

versions:

Minute minder timer (1 to 99 minutes):
The minute minder timer can be 

operated if the cooking zones are 

switched off. The timer display shows 

"00" with a blinking dot. 

Summary of Contents for KH-9126CT00-EU




















Reviews: