EN - 6
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to pre
-
vent a hazard.
Installation Warnings
•
Do not operate the appliance be-
fore it is fully installed.
•
The appliance must be installed
by an authorized technician and
put into use. The manufacturer is
not responsible for any damage
that might be caused by defective
placement and installation by una-
uthorized persons.
•
When you unpack the appliance,
make sure that it is not damaged
during transportation. In the event
of any defect; do not use the appli-
ance and contact a qualified servi
-
ce agent immediately. As the ma
-
terials used for packaging (nylon,
staplers, styrofoam...etc.) may
cause harmful effects to children,
they should be collected and dis-
posed of immediately.
•
Protect your appliance against
atmospheric effects. Do not expo
-
se it to effects such as sun, rain,
snow etc.
•
The surrounding materials of the
appliance (cabinet) must be able
to withstand a temperature of a
min. of 100°C .
•
During use
• Do not put flammable or combus
-
tible materials, in or near the appli-
ance when it is in operation.
•
Do not leave the cooker while co-
oking with solid or liquid oils. They
may catch fire as a result of of ext
-
reme heating. Never pour water
on to flames that are caused by
oil. Cover the saucepan or frying
pan with its cover to choke the fla
-
me that has arisen in this case and
turn the cooker off.
•
Always position pans over the
centre of the cooking zone, and
turn the handles to a safe positi-
on so they cannot be knocked or
grabbed.
•
If you are not going to use the
appliance for a long time, remove
the plug from the socket. Keep the
main control switched off. Additio
-
nally, when not using the applian-
ce, shut the gas valve off.
•
Make sure the appliance control
knobs are always in the “0” (stop)
position when it is not being used.
•
The temperature of the bottom
surface of the hob may increase
during the operation. Therefore, a
board must be installed underne-
ath the product.
•
During cleaning and maintenance
•
Always turn the appliance off befo-
re operations such as cleaning or
maintenance. You can do it after
removing the plug for the applian-
ce off or turning the main switches
off.
•
Do not remove the control knobs
to clean the control panel.
•
TO MAINTAIN THE EFFICIENCY
AND SAFETY OF YOUR APPLI-
ANCE, WE RECOMMEND YOU
ALWAYS USE ORIGINAL SPA-
RE PARTS AND ONLY CALL
OUR AUTHORIZED SERVICE
