EN - 21
3.
Use the “
+
” and
“
-
” buttons to set the
desired finishing time.
4.
The current time will
reappear on the
screen, the symbols
“
A
” and “
” will remain
illuminated.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol “
A
” will flash. Turn
both control knobs to the “
0
” position and
press any key on the timer to stop the
sound. Press “
MODE
” for 2 seconds the
“
A
” symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 23 hours and 59
minutes after the current time of day can be
set. Prepare the food for cooking and put it
in the oven.
1.
Select the desired cooking function and
the temperature using the control knobs.
2.
Press “
MODE
” until
you see “
dur
” symbol
on the screen. The
symbol “
A
” will flash.
3.
Select the desired
cooking time period
using the “
+
” and “
-
”
keys.
4.
Press “
MODE
” until
you see “
end
” symbol
on the screen. The
time and the symbols
“
A
” will flash.
5.
Select the desired
finishing time using the
“
+
” and “
-
” keys. “
”
symbol will disappear.
Add the cooking period
to the current time of
day. You can set a time
of up to 23 hours and
59 minutes after this.
6.
The current time
will reappear on
the screen, and the
symbols “
A
”, and will
remain illuminated.
The operating time will be calculated and
the oven will automatically start “ ” symbol
will reappear on the screen so that cooking
will finish at the set finishing time. When the
timer reaches zero, the oven will switch off,
an audible warning will sound and the
symbols “
A
” will flash. Turn both control
knobs to the “
0
” position and press any key
to stop the sound. The symbol will
disappear and the timer will switch back to
manual function. Press “
MODE
” for 2
seconds the “
A
” symbol will disappear and
the timer will switch back to manual
function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press “
+
” and “
-
” keys and the
dot in the middle of the screen will start
to flash. Press “
MODE
” to display current
signal sound. After this, each time the “
-
”
button is pressed, a different signal will
sound. There are three different types of
signal sounds. Select the desired sound
and do not press any other buttons. After
a short time, the selected sound will be
saved.
