EN - 17
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbol “
A
” will flash. Turn both
control knobs to the “
0
” position and press
any key on the timer to stop the sound. The
symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1.
Select the desired cooking function and
the temperature using the control knobs.
2.
Press “
MODE
” until
you see “
dur
” on the
screen. The symbol
“
A
” will flash.
3.
Select the desired
cooking time period
using the “
+
” and “
-
”
buttons.
4.
The current time
will reappear on the
screen, ´and the
symbols “
A
” and
will remain illuminated.
5.
Press “
MODE
” until
you see “
end
” on the
screen. The symbol
“
A
” and the current
time of day will flash.
6.
Select the desired
finishing time using the
“
+
” and “
-
” buttons.
7.
Add the cooking
period to the current
time of day. You can
set a time of up to 23
hours and 59 minutes
after this.
8.
The current time
will reappear on the
screen, ´and the
symbols “
A
” and
will
remain illuminated.
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbol “
A
” will flash. Turn both
control knobs to the “
0
” position and press
any key to stop the sound. The symbol will
disappear and the timer will switch back to
manual function.
Sound Adjustment
To adjust the volume of the audible warning
sound, press the “
MODE
” button three
times while the signal is sounding. The
oven function selector knob must be at the
“
0
” position. “
L3
” will appear on the display
screen. Press the “
+
” and “
-
” buttons to
adjust the sound level. Release the buttons
and, after a few seconds, the signal sound
volume will be set.
4.3
aCCeSSorieS
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
T2
5
4
3
2
1
T1
• Insert the accessory to the correct
position inside the oven.
• Allow at least a 1 cm space between the
fan cover and accessories.
