EN
- 1
5
2.
Press “ ” until you see “
End
”
and
symbol on the display screen. “ ” and the
current time of day will flash.
3.
Use the “
+
” and “
-
” buttons to set the
desired finishing time.
4.
The current time will reappear on the
screen, the symbols “ ” and will remain
illuminated.
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbol “ ” and will flash.
Turn both control knobs to the “
0
” position
and press any key on the timer to stop the
sound. Press “ ” for 2 seconds the “ ”
symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1.
Select the desired cooking function and
the temperature using the control knobs.
2.
Press “ ” until you see “
dur
”
symbol on
the screen. The symbol “ ”
and will flash.
3.
Select the desired cooking time period
using the “
+
” and “
-
” keys.
4.
Press “ ” until you see “
end
” and
symbol on the screen. The time and the
symbols “ ” and will flash.
5.
Select the desired finishing time using
the “
+
” and “
-
” keys. Add the cooking period
to the current time of day. You can set a
time of up to 10 hours after this.
6.
The current time will reappear on the
screen, and the symbols “ ” and will
remain illuminated.
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbols “ ” and will flash. Turn
both control knobs to the “
0
” position and
press any key to stop the sound. Press “ ”
for 2 seconds the “ ” symbol will disappear
and the timer will switch back to manual
function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the “
-
” button for
1-
1-2 seconds until an audible signal sound
After this, each time the “
-
” button is
pressed, a different signal will sound. There
are three different types of signal sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.
The Thermostat symbol
