Sharp IM-DR500E Operation Manual Download

Page: 84 / 88

IM-DR580H

03/10/15 IM-DR580H(E)9.fm

IM-DR580H(E) TINSE0568AWZZ

Ref

rences

-E

r M

ess

Error Messages

ERROR MES-

SAGES

MEANING

BATT EMPTY
(LoBATT)

The battery has run down.

BLANK MD
(BLANK)

Nothing is recorded.

(Replace the disc with a recorded disc.)

BUSY

A track is being moved.

Can't COPY

You tried to record from a copy prohib-
ited MiniDisc.

(Record using the analogue cable.)

You tried to record signals other than
music (such as data).

Can't EDIT
(Can't E)

A track cannot be edited.

(Change the stop position of the track and
then edit it.)

(Can't E)

Stamp function does not work.

(Check the number of tracks.)

Can't LOCK
(Can't L)

You tried to record or edit whilst the
compartment could not be locked.

(Reload the MiniDisc.)

Can't PLAY

You tried to play back a track that can-
not be played with this equipment.

ERROR MES-

SAGES

MEANING

Can't READ (*)
(Can't S)

The disc data cannot be read because
the disc is damaged.

(Reload the Minidisc or replace it with an-
other one.)

Can't REC
(Can't R)

Recording cannot be performed cor-
rectly due to vibration or shock.

Can'tWRITE

Cannot save the TOC information cor-
rectly to a MiniDisc.

DEFECT!

The disc is scratched.

(If the recorded sound is not right, retry re-
cording or replace the disc with a record-
able one.)

DISC FULL
(D-FULL)

The disc is out of recording space.

DISCONNECT
(NO MIC)

A recording source or a microphone is
not connected.

Er-MD (**)

The microprocessor has reported a
system fault and the unit is out of order.

(To have it repaired, go to the distributor
where you purchased the unit.)

GROUP FULL

The total number of groups exceeds
99.

(Erase unnecessary groups.)

Summary of Contents for IM-DR500E

























































































Search results

Summary of Contents for IM-DR500E

Reviews:

Related manuals for IM-DR500E

Brands by name

Popular brands

Sharp IM-DR500E, Operation Manual

Search results

Summary of Contents for IM-DR500E

Reviews:

Related manuals for IM-DR500E

Brands by name

Popular brands