Sharp IM-DR410E Page 46 Operation Manual Download

Page: 46 / 52

03/7/21 IM-DR410E_6.fm

IM-DR410E

IM-DR410E TINSE0550AWZZ

Ref

renc

-E

r M

ess

Error Messages

A number or symbol appears in (*) position.

ERROR

MESSAGES

MEANING

BATT EMPTY

The battery has run down.

BLANK MD

Nothing is recorded.

(Replace the disc with a recorded disc.)

Can't COPY

You tried to record from a copy pro-
hibited MiniDisc.

(Record using the analogue cable.)

You tried to record signals other than
music (such as data).

Can't EDIT

A track cannot be edited.

(Change the stop position of the track
and then edit it.)

Can't LOCK

You tried to remove the MD whilst re-
cording or editing.

Can't PLAY

You tried to play back a track that
cannot be played with this equip-
ment.

Can't READ
(*)

The disc data cannot be read be-
cause the disc is damaged.

(Reload the Minidisc or replace it with
another one.)

Can't REC

Recording cannot be performed cor-
rectly due to vibration or shock.

ERROR

MESSAGES

MEANING

Can'tSTAMP

Stamp function does not work.

(Check the number of tracks.)

Can'tWRITE

Cannot save the TOC information
correctly to a MiniDisc.

DEFECT!

The disc is scratched.

(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)

DISC FULL

The disc is out of recording space.

Er-MD (**)

The microprocessor has reported a
system fault and the unit is out of or-
der.

(To have it repaired, go to the distributor
where you purchased the unit.)

HOLD

The unit is in the hold mode.

LOCKED

You removed a MiniDisc whilst re-
cording or editing.

(Turn off the power before removing the
MiniDisc.)

NO DISC

A disc has not been loaded.

Summary of Contents for IM-DR410E





















































Search results

Summary of Contents for IM-DR410E

Reviews:

Related manuals for IM-DR410E

Brands by name

Popular brands

Sharp IM-DR410E, Operation Manual

Search results

Summary of Contents for IM-DR410E

Reviews:

Related manuals for IM-DR410E

Brands by name

Popular brands