Sharp HT-X1H, Service Manual

Page: 9 / 88

HT-X1H
3 – 1
Audio HT-X1H Service Manual HT-X1H Market E CHAPTER 3.
MECHANISM BLOCKS
[1] Caution on diassembly
Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:
1. Take cassette tape, and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange
the leads where they were before disassembling.
(A2)x7
M3x12mm
(A4)x5
M3x6mm
(A4)x2
M2.5x10mm
(A6)x1
M2x3mm
(A1)x1
Rear Panel
Front Panel
Center Panel
1 Rear Panel with 1. Terminal Cover ....... (A1) x1
2. Screw .................... (A2) x7
Terminal/Tuner
4. Screw ................... (A4) x15
5. Socket ...................... (A5) x1
PWB
DSP PWB/DVD
Unit
6. Screw ...................... (A6) x3
7. Shield Box A ........... (A7) x1
8. Shield Box B ........... (A8) x1
2 1. Screw ...................... (B1) x4
4. Screw ...................... (B4) x1
6. Screw ...................... (B6) x4
5. Bracket...................... (B5) x1
2. Flat Cable ............... (B2) x2
3. Socket ..................... (B3) x2
4. Socket ..................... (C4) x3
3. Socket ..................... (A3) x7
3 Front Panel with
Display/
Headphone/
Switch/LED PWB 1. Knob ...................... (C1) x1
2. Nut .......................... (C2) x1
3. Screw ...................... (C3) x6
5. Screw ...................... (C5) x2
6. Screw ...................... (C6) x3
7. Screw ...................... (C7) x1
STEP
REMOVAL PROCEDURE
HT-X1H (DVD Unit)
(A4)x4
M3x10mm
(A3)x3
Terminal PWB
Rear Panel
Tuner PWB
(A3)x3
(A8)x1
(A3)x1
(A5)x1
(A7)x1
(A6)x1
M2x3mm
(A6)x1
M2x3mm
(A4)x4
M3x10mm
Center Panel with
(B1)x4
M3x8mm
DSP PWB
DSP PWB
Pull
Pull
DVD Unit
(B3)x2
(B5)x1
(B2)x1
(B2)x1
(B4)x1
M2.5x10mm (B6)x4
M3x8mm
Display PWB
Center Panel