AUD 2012 02 01
Date of Issue: 8
th
February 2012
Classification:
White
AUDIO TECHNICAL BULLETIN
Page 6 of 6
Sharp Electronics (UK) Limited
Reference – RG20120119
Revision
- 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Make sure the PORT selected is correct (detach and attach back the USB cable should do
the trick)
11. Turn on the Mains supply to the unit and ensure both programmer lights are on.
12. Click “open file” and locate the update software from your known location and press start.
( if any error occurs, turn AC OFF and AC ON back, then click "START" again.)
13. When reprograming is completed the message “ Write Block ( 0 – 155 ) OK” will be displayed
as below
14. Unplug the Mains supply and remove programming tools and check funtionality to ensure all
is OK.
Summary of Contents for HT-SL50
Page 20: ...HT SL50 6 8 MEMO ...
Page 31: ...HT SL50 10 MEMO ...
