Sharp HT-SBW160, User Manual

Page: 8 / 52

6
• If a device is connected via HDMI (CEC active), the main unit and the
subwoofer will switch on automatically when the external device is
switched on.
• If the main unit is not connected with the subwoofer and it is in On
mode, the POWER Indicator will fl ash. Follow step 1 ~ 4 above to pair the
subwoofer to the main unit.
Basic Operation
Standby/ON
• When you fi rst connect the unit to the main socket, the unit will be in
STANDBY mode. The POWER indicator will light up red.
• Press the button on the remote control to switch the main unit ON
or OFF.
• Disconnect the main plug from the main socket if you want to switch the
unit off completely.
– If a TV or an external device (Only for AUX socket) is connected, the unit will
switch on automatically when the TV or the external device is switched on.
– When the unit has no input signal for over 15 minutes, it will automati-
cally switch to Standby mode.
Select Modes
Press the SOURCE button on the unit repeatedly or press the AUX, BT
(Bluetooth), OPTICAL, HDMI ARC buttons on the remote control to select
the desired mode.
•
Red indicator: In STANDBY mode.
•
Green indicator: In AUX mode.
•
Orange indicator: In Optical mode.
•
Blue indicator: In Bluetooth mode.
• •
White indicator: In HDMI ARC mode.
Adjust the Volume
– Press the + / - buttons on the unit or press the VOL+ / VOL- buttons on
the remote control to adjust the volume.
– If you wish to turn the sound off , press the MUTE button on the remote
control. Press the MUTE button again or press the VOL+ / VOL- buttons
on the unit or on the remote control to resume normal listening.
– While adjusting the volume, the status indicator fl ashes quickly.
– While the volume level reaches its maximum level, if you press the VOL+
button again, the status indicator fl ashes once. While the volume level
reaches its minimum level, if you press the VOL- button again, the status
indicator fl ashes once.
Select Equaliser (EQ) Eff ect
• While playing, press the NEWS or MOVIE or MUSIC buttons on the remo-
te control to select between preset equalisers: Movie (recommended
for viewing movies), Music (recommended for listening to music), NEWS
(recommended for listening to NEWS).
AUX/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the SOURCE button on the unit repeatedly or
press the AUX, OPTICAL, HDMI ARC buttons on the remote control to
select the desired mode.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– button to adjust the volume to your desired level.
TIP
:
While in HDMI ARC/OPTICAL mode, if there’s no sound output from the
unit and the HDMI ARC/OPTICAL lights fl ashes quickly, you may need to
activate PCM signal output on your source device (eg. TV, DVD or Blu-ray
player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The fi rst time you connect your Bluetooth device to this player, you need to
pair your device to this player.
NOTE
:
– The operational range between this player and a Bluetooth device is
approximately 8 meters (without any object between the Bluetooth
device and the unit).
– Before you connect a Bluetooth device to this unit, ensure you know the
device’s capabilities.
– Compatibility with all Bluetooth devices is not guaranteed.
– Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
– If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
1. While in ON mode, press the (Bluetooth) button on the remote control
or on the unit to select Bluetooth mode. The Blue indicator will light
fl ash.
2. Activate your Bluetooth device and select the search mode. “HT-
SBW160” will appear on your Bluetooth device list.
– If you cannot fi nd the unit, press and hold the " / PAIR" button on the
remote control to be searchable. After the “Pairing” voice prompt and the
Blue indicator will fl ash rapidly.
3. Select “HT-SBW160” in the pairing list. After the “Paired” voice prompt,
the system is successfully connected and the Blue indicator will light
up solidly.
4. Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
– Switch to another function on the unit.
– Disable the Bluetooth function on your device.The device is successfully
disconnected from the unit after the “Disconnected” voice prompt.
– Press and hold the “ / PAIR” button on the remote control.
TIPS
:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this player in 2 minutes, the
player will reconnect to the previous connection.
• The player will also be disconnected when your device is moved beyond
the operational range.
• If you want to reconnect your device to this player, place it within the
operational range.
• If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the player.
• If the connection is lost, follow the instructions above to pair your device
to the player again.
Listen to Music from Bluetooth Device
– If the connected Bluetooth device supports Advanced Audio Distri-
bution Profi le (A2DP), you can listen to the music stored on the device
through the soundbar'.
– If the device also supports Audio Video Remote Control Profi le (AVRCP),
you can use the soundbar's remote control to play music stored on the
device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
– To pause/resume play, press the / PAIR button on the remote control.
– To skip to a track, press the / buttons on the remote control.