Sharp HT-SB500 Operation Manual Download Page 28

Page: 28 / 33

E-15

HT-SB500

2009 October 6

HT-SB500_A6_EN.fm

ENGLISH

sic Op

erat

ion

General control

To turn the power on

Press the ON/STAND-BY button on the remote control or touch
anywhere on the display panel. All the indicators will be
displayed to indicate pad positions.

The stand-by indicator turns GREEN. If the power does not

turn on, check whether the power lead is plugged in properly.

To set the speaker to stand-by mode:

Press the ON/STAND-BY button again on the remote control

or touch ON/STAND-BY pad on the speaker.

The on/stand-by indicator turns ORANGE.

Display brightness control

Press the DIMMER ON/OFF button to adjust the brightness of

the display and sound mode indicator.

Volume auto fade-in

If you turn off and on the speaker with the volume set to 40 or

higher, the volume starts at 20 and fades in to the last set level.

Volume control

Remote control operation:

Press the button to increase the volume and the

VOLUME – button to decrease the volume.

Preset sound mode

Speaker operation:

Touch a desired sound mode on the speaker.

Remote control operation:

Press a desired sound mode on the remote control.

Sound mode indicator and display bright. Display will off after 5
seconds without any button/pad operation.

Sound mode indicator and display dim. Display will off after 5
seconds without any button/pad operation.

VOL

Speaker operation:

Touch volume up pad to increase the

volume and touch volume down pad

to decrease the volume.

Muting

The volume is muted temporarily when pressing

the MUTE button on the remote control. Press

again to restore the volume.

NEWS

TruSurround HD on for news

CINEMA/GAME TruSurround HD on for cinema/game

sound effect

SPORT

TruSurround HD on for sport broadcasting

STANDARD

TruSurround HD on for standard sound
effect

00 01 02 ..... 59 60

Summary of Contents for HT-SB500


































Search results

Summary of Contents for HT-SB500

Reviews:

Related manuals for HT-SB500

Brands by name

Popular brands

Sharp HT-SB500, Operation Manual

Search results

Summary of Contents for HT-SB500

Reviews:

Related manuals for HT-SB500

Brands by name

Popular brands