E-8
Caution:
Turn off all other equipment before making any connections.
Notes:
●
To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar.
●
Refer the operation manual of the equipment to be connected.
●
Fully insert the plugs to avoid fuzzy pictures or noises.
●
If the TV volume is continuously at low level, the sound bar will automatically power off. Increase the TV output volume
to enjoy the sound from the system.
●
To avoid desynchronized audio and video when using an external player, connect the output signal from the player to
TV and the audio output (from TV) to the sound bar.
■
Connecting a TV, or DVD player, etc.
If the TV/monitor has an audio or optical output, connect it to the AUDIO IN jack or OPTICAL IN jack on the rear of the
sound bar.
Sound bar connections to TVs
Optical digital audio cable
(supplied)
Audio cable (commercially
available)
To AUDIO IN
input terminal
Audio signal
To audio output terminals
TV
or
Blu-Ray/DVD player/
Digital Tuner
Sound bar
To OPTICAL IN
(optical) input
terminal
To optical
digital audio
output
terminal
Optical digital audio
cable
Press the INPUT button repeatedly to select:
Function
On/Standby/Input/
Bluetooth
Pairing Indicator
OPTICAL IN
Turns green
AUDIO IN
Turns cyan
Bluetooth
Turns blue
Remote control
WARNING
DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD
●
The remote control supplied with this product
contains a coin/button cell battery. If the coin/button
cell battery is swallowed, it can cause severe
internal burns in just two (2) hours and can lead
to death.
●
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
●
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
This product contains a CR Coin Lithium Battery which con-
tains Perchlorate Material – special handling may apply.
California residents, see
www.dtsc.ca.gov/hazardouswaste/perchlorate/
■
Battery installation
1
While pushing the locking tab toward the center of the
remote control, slide out the battery holder.
Locking tab
Back of remote control
2
Remove the old battery from the battery holder, insert
the new battery and then slide the battery holder back
into the remote control.
Battery type
Battery holder
Locking tab
Polarity (+)
symbol
Positive (+) side up
Audio cable
