Sharp GX-T17, User Manual

Page: 71 / 127

70 Gallery
Finding an Entry
You can recall Chinese word entries by entering the
first few characters.
The following is an example from the Chinese User
Dictionary.
Please notice the word
is already
stored at this example.
1. Press 6 (3 times quickly)
then Press and hold 1 and enter
“
”.
2.
The character “ ” appears at
.
Normally “ ” appears here.
3.
Long press and enter “ ”.
4.
Long press
then the following characters
appear.
Note
• This function doesn’t appear, if the entry word was
made by less than 4 letters or no Chinese characters
included.
Though, you can use this as a shortcut if the word was
created by Chinese character, since candidate
character appears at so you only have to push
without searching for following characters.
• If there were a stored word which shares the first 1-4
character such as “ ”, candidate “ ”
appears at or .
The latest entry comes to , and if there were three or
more entry starts with “
”, old candidate appears
at in lower list, and so on.
• If there were a stored word which shares the first 5 or
more characters, such as “ ”, after
“ ” was entered, the latest character of entry
completes.
This example is using
BoPoMoFo mode