Sharp GX-CD5200V, Operation Manual

Page: 29 / 44

04/1/28 CX-GD5200V_EN2.fm
E-28
ENGLISH
GX-CD5200V
Radio
■
To change the audio mode
Sound of the playback source can be switched among the STEREO,
L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Notes:
●
The initial audio mode setting is "STEREO".
●
When playing a sound multiplexed disc on which a vocal and
music have been separately recorded, select the audio mode as
desired.
Listening to the radio
■
Tuning
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING button again.
Press the VCD AUTO/VCD/AUDIO
MODE button on the remote
control until the desired audio
mode is displayed.
Each time the VCD AUTO/VCD/
AUDIO MODE button is pressed,
the mode will change as follows:
STEREO Sounds on the left and right channels are played.
L-CH Sounds on the left channel only are played.
R-CH Sounds on the right channel only are played.
V-CANCEL The main vocal is lowered.
STEREO L-CH R-CH V-CANCEL
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM, SW-1, SW-2 or MW).
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will stop
at the first receivable broadcast station.