04/1/28
GX-CD1300MP MK2_EN
E-13
ENGLISH
GX-CD1300MP
MK2
Disc Playback
Preparation for video CD playback
■
Adjusting the TV and VCR
The TV and VCR input varies according to the connection method.
Be sure to make the settings correctly. (Then, follow the playback
procedure on page 14 to check the settings.)
■
Selecting the video output format
Video CD is recorded in PAL or NTSC format.
Select the video output format (NTSC or PAL) according to your TV
or VCR.
To select the video output format:
Whilst in the stop mode, press the PAL/NTSC button.
Each time this button is pressed, the format will change in the
following order:
Notes:
●
When you watch a PAL disc in the NTSC mode or an NTSC disc
in the PAL mode, the vertical size of the picture will not be
modified.
●
If a multi-mode TV is equipped with an input selector switch, set
the switch to “MULTI MODE”. For the details, refer to the TV
operation manual.
●
Do not change the video output format during playback. If you do,
the picture signal may not be output properly.
●
Picture may be distorted when the setting is switched. This is not
the malfunction of the unit.
VCR
TV
......
..
.... .
.
<For TV sets with a video input socket>
<For TV sets without a video input socket>
Set the input selector to
Game/Video.
Set the TV/VCR
selector to VCR.
Set the input selector
to VCR.
NTSC
Auto
PAL
PAL 60
VCD/CD
CLEAR
PAL/NTSC
PBC
PROGRAM/
MODE
DIRECT
DIGEST
OSD
AUDIO
1
2
3
4
5
6
7
8
0
10
9
PAL/NTSC
