q
FRONT CABINET REMOVAL
(Refer to Figures 2 and 3)
Pull out the power cord plug or adaptor plug from the unit.
2. Take out the cassette tape from the cassette
3. Remove eight
screws retaining the front cabinet.
4. Gently pull out the front cabinet and disconnect four
connected to the main
board
q
OPERATION PANEL REMOVAL
(Refer to Figure 3)
1. Remove the front cabinet as described in front cabinet
removal.
2. Remove seven
knobs (record level, bass, treble,
Figure 2
and fader).
3. Gently lift up the operation panel from the back cabinet.
DIAL SCALE PLATE REMOVAL
(Refer to Figure 3)
Remove the operation panel as described in operation panel
removal.
2. Remove four
screws retaining the dial scale plate.
3. Gently pull out the dial scale plate from the chassis.
MECHANISM BLOCK REMOVAL
(Refer to Figure 4)
1. Remove the dial scale plate as described in dial scale plate
removal.
2. Disconnect the tip (muting) and two (2) sockets
connected to the main
board and the motor
P.W. board.
3. Remove four (4) screws retaining the mechanism block.
4. Gently pull out the mechanism block from the main P.W.
board holder.
q
PHONO JACK PLATE REMOVAL
(Refer to Figure 5)
1. Remove the mechanism block as described in mechanism
block removal.
2. Remove two (2) screws retaining the phono jack plate.
3. Gently pull out the phono jack plate from the back cabinet.
CHASSIS
REMOVAL
(Refer to Figure 5)
1. Remove the phono jack plate as described in phono jack
plate removal.
2. Remove two
knobs (tuning and fine tuning).
3. Disconnect three (3) tips (Antenna) and two (2) tips (DC
supply) connected to the main P.W. board.
4. Remove seven
screws
the chassis
5. Gently
out the chassis (P.W.B.) from the back cabinet.
Figure 3
Figure 4
Figure 5
- 3
