Sharp FV-DB2E Operation Manual Download Page 21

Page: 21 / 24

FV-DB2E

05/4/21

FVDB2E_UK.fm

TINSEA048SJZZ

ced Fea

tures

Enhancing your system

Connecting to a stereo system, etc.

You can enjoy the sound through a stereo system by connecting to
the unit with an audio cable.

Notes:

Plug in each cable fully to prevent noise interference.

Refer to the manual for the connected equipment.

The unit produces both DAB and FM sound.

Headphones

Before plugging in or unplugging the headphones, reduce the vol-
ume.

Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the volume control.

Turn off all other equipment before making this connection.

Stereo system, etc.

Headphones

To audio input
sockets

Audio cable

(commercially available)

Summary of Contents for FV-DB2E

























Search results

Summary of Contents for FV-DB2E

Reviews:

Related manuals for FV-DB2E

Brands by name

Popular brands

Sharp FV-DB2E, Operation Manual

Search results

Summary of Contents for FV-DB2E

Reviews:

Related manuals for FV-DB2E

Brands by name

Popular brands