TROUBLESHOOTING
Before calling for repair, check the symptoms below for possible remedies, since the problem may
not be a malfunction of the unit.
SYMPTOM
REMEDY (not a malfunction)
The remote control does not
work
• Have the batteries been depleted?
• Are the batteries inserted correctly?
• Is a fluorescent lighting in the room flickering due to service
life? (Refer to E-3)
Odours and smoke cannot be
removed easily
• Are the filters heavily soiled? (Refer to E-13)
The Clean sign lights green
even when the air is dirty
• Is the opening of the dust sensor blocked or clogged?
• Was the air already dirty when the power plug was inserted
into the wall outlet? (Refer to E-4)
The Clean sign lights orange or
red even when the air is clean
• The sensitivity of the sensor becomes unstable when the
opening of the dust sensor is dirty or is clogged.
Clean the dust around the sensor opening using a vacuum
cleaner. (Refer to E-12)
The cluster ion lamp remains
green (blue) and does not
change
• During the Clean mode (or Refresh mode), the cluster ion lamp
colour will not change.
A sound is
heard from the
unit
Click, click
Tick, tick, tick
• This is the sound that is emitted when the unit is in the Refresh
mode.
If the sound is irritating, switch the unit to the Clean mode.
• This is the sound that is emitted when the unit is generating
cluster ions.
• Noise level of generating cluster ions varies depending on
humidity of room air, but cluster ions are effective regardless
of the noise level.
If the sound is irritating, such as when sleeping, etc., use to
keep this product away.
The discharged air smells
• The ozone generated by the cluster ion generator may have
an odour. However, the density of ozone generated is very little
and is harmless to the human body. Furthermore, the ozone
decomposes quickly so it does not accumulate in the room.
The unit does not operate even
when smoking cigarettes
• Is the unit installed in a location that is difficult for the sensors
to detect cigarette smoke?
• Are the odour and dust or dust sensor openings blocked or
clogged? (In this case, clean the openings.)
(Refer to E-12)
SPECIFICATIONS
The applicable floor surface area is the surface area for
when operating the unit in Max fan level.
(According to Japan Electrical Manufacturers’ Association
JEM1467)
Power supply
220V-240V 50Hz
Fan level
operation
Fan level adjustment
Max
High
Median
Silent
Rated power
39W
21W
10W
4W
Fan level
240m
3
/hour 180m
3
/hour 117m
3
/hour
30m
3
/hour
Applicable floor surface
~31m
2
Cord length
2.5m
Dimensions
415mm(W)X197mm(D)X572mm(H)(W/ stand)
Weight
6.6kg
About the reduction of standby power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product
consumes about 0.8W of standby power.
(At this time, the power lamp will be on) For the conservation of energy, remove the power plug when not
using the unit
E-14
SHARP CORPORATION
OSAKA, JAPAN
TINS-A067KKRZ 02LK
1
