Sharp FU-28H, Operation Manual

Page: 8 / 20

INSTALLATION
FOR APPROPRIATE INSTALLATION
To remove room odour
Installing the unit high up on the wall is most effective.
To remove room dust
Comparatively large dust particles such as pollen and house dust collect in the lower strata of the
room air.
Select a location in the room where the air circulation is good.
This improves the cleaning performance and causes Plasmacluster ions to spread throughout the
room.
Operating Conditions
Please operate the unit under the following conditions.
It is recommended to use the unit in a room where the temperature is in the range of 0 - 35C
°
.
Avoid locations where the unit is exposed to condensation, due to drastic temperature changes.
E-6
Installation Cautions
• Before fixing the wall mounting bracket, make sure there is nothing that could obstruct installation of the unit.
Then fix the wall mounting bracket through screw holes with the supplied wood screws.
• Install the unit on a wall, wooden pillar, crosspiece or the like that is flat and strong enough..
• If the wall is weak or made of concrete, have the unit installed by a specialist such as an electric appliance
store.
• Avoid locations near inverter lamps or where the unit is exposed to direct sunlight.
1
Determine the mounting location
Leave space around the bracket referring to the drawing below. The unit cannot
be mounted if there is insufficient spacing around the bracket.
207mm
337mm (
Size of main unit)
48mm
54mm
235mm
482mm ( Size of main unit)
Power cord
330mm
16mm
60mm
3mm
92mm
Wall mounting bracket
Screw Holes
Screw Holes
Size of main unit
70cm or more from
side wall 70cm or more from
side wall
Center line of Wall mounting bracket
Center line of main unit
Center line of
main unit
45cm or more from the ceiling