Sharp FP-GM50E, Operation Manual, Page: 14 / 76

E-12
Gently remove dust from the Pre-filter panel,
using a vacuum cleaner attachment or similar
tool.
Pre-filter
To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
Pre-filter
CAUTION
Do not apply excessive pressure, when
scrubbing the pre-filter.
1. Add a small amount of kitchen detergent to water and
soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the filter in a well-ventilated area.
NOTE
How to clean hard to remove dirt
Pre-filter
CATCH PANEL
Remove the Glue Sheet and Mosquito Tray, and then gen-
tly remove dust from the Catch Panel by using a vacuum
cleaner attachment or similar tool.
CAUTION
Do not apply excessive pressure, when scrubbing the
catch panel.
When the smell from the Air Outlet
When the smell is hard to take
Do not WASH
Pre-filter
Once a month
CATCH PANEL
Once in two months
UNIT
Once in
two months
HEPA FILTER
When the smell from the Air Outlet
When the smell is hard to take
Deodorizing FILTER
FP-GM50E_50L_EN.indd 12 2016/11/07 11:52:57