background image

3

television reception, try one or more of 

the following measures:
•  Adjust or reposition the receiving 

antenna.

•  Increase the distance between the 

product and the radio or TV.

•  Connect the equipment into an outlet 

on a circuit different from that of the 

radio or TV receiver.

•  Consult the dealer or a qualified radio 

or TV technician. 

CAUTIONS CONCERNING 

OPERATION

•  Do not block the Air Inlet or Air Outlet.

•  Do not place the product near or 

on hot objects, such as stoves or 

heaters, or where it may come into 

contact with steam.

•  Always operate the product in an 

upright position.

•  Do not move the product when it is in 

operation.

•  When moving the product, use the 

handles on both sides.

•  If the product is on easily damaged 

flooring, an uneven surface, or thick-

piled carpet, lift it up when moving.

•  Do not operate the product without 

the filters properly installed.

•  Do not wash and reuse the HEPA filter 

and the Deodorizing Pre filter. Doing 

so will not improve filter performance 

and can also cause electric shock or 

operating malfunctions.

•  Clean the exterior with a soft cloth 

only. Do not use volatile fluids or 

detergents. The product surface may 

be damaged or cracked with Benzine 

paint thinner or polishing powder. In 

addition, the sensors may malfunction 

as a result.

• 

Do not scrub the Back Panel hard 

during its maintenance. 

INSTALLATION 

GUIDELINES

•  Avoid locations where the sensors 

are exposed to direct wind. Doing so 

can cause the product to malfunction.

•  Avoid locations where furniture, 

fabrics, or other objects can come in 

contact with the product and interfere 

with the inlet and outlet of air.

•  Avoid locations where the product is 

exposed to condensation or drastic 

changes in temperature. Appropriate 

room temperature is between 0 – 35 

ºC.

•  Place the product on a level and 

stable surface with sufficient air 

circulation. When placed on heavy 

carpet, the product may vibrate 

slightly. 

•  Avoid locations that generate grease 

or oily smoke. Doing so can cause 

the product exterior to crack and the 

sensors to malfunction.

•  The dust collecting ability of the 

product is effective even when the 

product is as close to 3 cm from 

the wall, the surrounding walls and 

floor may get dirty. Please place the 

product at a distance from the wall. 

The wall directly behind the Air Outlet 

may become dirty over time. When 

using the product for an extended 

period of time at the same location, 

periodically clean the walls adjacent 

to it. 

FILTER GUIDELINES

•  Follow the instructions in this manual 

for proper filter care and maintenance.

FP-A80M.indd   3

FP-A80M.indd   3

2022/03/01   11:24:43

2022/03/01   11:24:43

Summary of Contents for FP-A80M

















Reviews: