1 – 7
FO-6600U
3
Plug the power cord into a 120V, 60Hz, grounded (3-prong) AC
outlet.
Press the power switch to turn on the power.
6
Insert the male end of the PC interface cable into the port on the right
side of fax as shown. Tighten the attached screws with a screwdriver.
4
Attach the original document OUT tray by inserting the tabs into the
holes in the fax as shown.
5
Attach the received document tray by inserting the tabs into the holes
in the fax as shown.
7
Insert the female end of the PC interface cable into the serial (RS232C)
port on your computer. Tighten the attached screws with a screw-
driver.
4. Loading printing paper
The paper cassettes and the paper tray hold the paper on which re-
ceived documents are printed. The FO-6600 comes with two paper cas-
settes. Each paper cassette can hold 500 sheets of either legal or letter
size paper. The paper tray can hold 150 sheets of either legal or letter
size paper.
1
Grasp the hand hold on the cassette as shown, lift the cassette slightly,
and then pull it out as far as it will go. Do not force. Push down on
green levers on both sides of the cassette tray as shown, and then
pull it completely out of the fax using both hands.
OFF 0
ON |