manualshive.com logo in svg

Sharp FO-51, Service Manual

Share
Download
Sharp FO-51 Service Manual Download Page 10

1 – 8

FO-71RA

FO-51RA

Normal Dialing

1. Lift the handset or press                .

2. Dial the fax number.

3. Wait for the reception tone (if a person answers, ask them to press their Start

key).

4. Press                .

Rapid Key Dialing

Press the appropriate Rapid Key. Transmission will begin automatically.

Speed Dialing

1. Press          .

2. Enter 2-digit Speed Dial number.

3. Press               .

Direct Keypad Dialing

1. Dial the fax number.

2. Press               .

[5] Quick reference guide

SPEAKER

SPEED

DIAL

START

START

Place your document (up to 5 pages) face
down in the document feeder.

SENDING FAXES

START

FAX

TEL

FAX

TEL

05   NOV  10:30

A.M.

TEL/FAX

A.M.

TEL/FAX

05   NOV  10:30

FAX

TEL

FAX

TEL

05   NOV  10:30

A.M.

TEL/FAX

A.M.

TEL/FAX

05   NOV  10:30

RESOLUTION/

RECEPTION MODE

TEL mode: Answer all calls (even faxes) by picking up the handset. To begin fax

reception, press               .

FAX mode: The fax machine automatically answers and receives faxes.

TEL/FAX mode: The fax machine automatically answers and receives faxes. Voice
calls (including manually dialed fax transmissions) are signalled by a special ring-
ing sound.

A.M. mode: Select this mode when an answering machine is connected to the fax
and the answering machine is turned on.

RECEIVING FAXES

Press the RESOLUTION/RECEPTION MODE key until the arrow in the display
points to the desired reception mode (make sure the document feeder is empty).

START

Summary of Contents for FO-51

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands