Sharp FO-3150, Service Manual

Page: 7 / 156

1 – 5
FO-3150U/C
3 Remove the new toner cartridge from its packaging. Shake the
cartridge side to side four or five times to distribute the toner
evenly within the cartridge.
4 Hold the toner cartridge by the handle with the stamped markings
on the cartridge facing upwards, and insert the cartridge into the
print compartment.
5 Place your thumb on the center of the handle where it is marked
PUSH, and push the handle down and in so that the cartridge fits
into place.
6 Close the print compartment cover, pressing down firmly on each
side to make sure it is completely closed.
7 Reset the toner counter and the drum counter as explained below.
Each time you install a new toner cartridge, follow the steps below to
reset the toner counter to zero. (The machine uses the toner counter to
inform you when the toner cartridge needs to be replaced.)
Each time you install a new drum cartridge, follow the steps below to
reset the drum counter to zero.
Resetting the toner counter
Resetting the drum counter
Press once and four times.
Press once and twice.
Press once.
Press .
Press to exit.
FUNCTION
START
STOP
Display:
PRESS START KEY
PRINT SET-UP
CLR TONER CNT.
CLR DRUM COUNT
1
2
3
4
5
1
2
3
4
5
Press once and four times.
Press once and once.
Press once.
Press .
Press to exit.
FUNCTION
START
STOP
Display:
PRESS START KEY
PRINT SET-UP
CLR DRUM COUNT
RECEIVE RATIO