Sharp FO-1460 Operation Manual Download Page 16

Page: 16 / 104

FO1460H-ISCO

<P=001>

Connections

Power lead

Plug the power lead into a 230 V, earthed (3-prong) AC outlet.

♦

The fax does not have a power on/off switch, so the power is turned on and
off by simply plugging or unplugging the power lead.

♦

Important: Whenever you unplug the power lead, disconnect the fax ma-
chine from the telephone network first.

♦

Caution: The mains outlet (socket-outlet) shall be installed near the equip-
ment and shall be easily accessible.

Telephone line cord

Plug one end of the telephone line into the socket on the fax marked "TEL.
LINE". Plug the other end into a new plan telephone wall socket.

♦

If you do not have a new plan telephone socket, contact your local tele-
phone supplier. Connection to the telephone network must not be hard
wired.

♦

Eire: Only the supplied cord should be used. If a longer cord is required,
please consult your supplier or servicing agent.

TEL.
SET TEL.

LINE

Chapter 1 Installation

Summary of Contents for FO-1460









































































































Search results

Summary of Contents for FO-1460

Reviews:

Related manuals for FO-1460

Brands by name

Popular brands

Sharp FO-1460, Operation Manual

Search results

Summary of Contents for FO-1460

Reviews:

Related manuals for FO-1460

Brands by name

Popular brands