EN -29-
•
Your machine may have either a single inlet
(cold) or double water inlets (cold/hot) based on its
specifications.
White-capped hose should be connected to the
cold water inlet and red-capped hose to hot water
inlet (applicable for machines with double water
inlets).
•
To eliminate water leakages in points of contact,
1 or 2 nuts are provided in the hose package (ap
-
plicable for machines with double water inlets).
Fit these nuts to the ends of new water inlet hoses
on the side of faucet.
•
Mount the new water inlet hoses to a ¾ ˝, thread
-
ed faucet.
•
Connect the white-elbow end of the water inlet
hoses to the white-filtered water inlet valve on the
rear side of the machine and the red-elbow end to
red-filtered one (applicable for machines with dou
-
ble water inlets).
Tighten plastic parts of the junctions using your
hand.
If unsure, have the connection works be done by a
qualified plumber.
•
Flow of water with pressure of 0,1-1 Mpa will
allow your machine to operate more efficiently.)
(0,1 Mpa pressure means that more than 8 litres
of water will flow through a fully-tapped faucet per
one minute.)
•
Ensure that points of contact do not leak by tap
-
ping the faucet completely after carrying making
CHAPTER -3: INSTALLATION
(WATER INLET HOSE CONNECTION)
3/4”
10
mm
