EN -14-
5-
Extra rinsing and anti allergic auxiliary function symbol
6-
Pump malfunction symbol
7-
Water cut off malfunction symbol
8-
Stain level symbol
9-
Wringing speed indicator symbol
10-
Economic washing temperature indicator symbol
11-
Washing temperature indicator symbol
Child Lock
To avoid programme flow from being affected if programme buttons are pressed or programme button is turned
when performing washing operation in your machine, child lock is available. Child lock will be activated in case
pressed on both auxiliary functions 4 and 5 at the same time for more than 5 seconds.
‘’
’’ symbol will flash on the electronic display when activated.
If pressed any button while child lock is active, the “CL” symbol will blink on the electronic display.
If while the child lock is engaged and any programme is running, the programme knob is switched to the OFF
position and another programme is selected, the programme previously selected continues from where it left.
To deactivate it, it will be sufficient to press on the same buttons for more than 5 seconds. When the child lock is
deactivated, the “
” symbol on the electronic display will go off.
Cancelling programme
If you want to cancel any programme running:
1- Switch the programme knob to “OFF” position.
2- Your machine will stop the washing operation and the programme will be cancelled.
3- To get rid of the water accumulated in the machine switch the programme knob to any programme.
4- Your machine will perform the necessary discharge operation and cancel the programme.
5- You can run your machine by selecting a new programme.
Finishing programme
Your machine will stop by itself as soon as the programme you have selected finishes.
- The expression of “END” will light on the electronic display for 2 minutes.
-
door lock open symbol shall be displayed on the screen.
- You can open the machine’s door and remove the laundry.
- Leave the door of your machine open to allow the inner part of your machine to dry after removing your laundries.
- Switch the programme knob to OFF position.
- Unplug your machine.
- Turn the water faucet off.
Warning of water cut-off / low mains water pressure
If symbol
flashes on the electronic display:
•
Water faucet may be closed. Check.
•
Mains water may be cut-off. Check. If so, switch the programme knob to position OFF. You can select a
programme and run your machine after the mains water is supplied.
•
Mains water pressure may be low. Check.
•
Water inlet hose may be twisted. Check.
• Water inlet hose may be clogged. Clean water inlet hose filters. (*)
• Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your machine.
Warning of clogged pump filter
If symbol
flashes on the electronic display:
• Pump filter may be clogged. Clean the pump filter. (*)
•
Discharging hose may be clogged or twisted. Check the discharging hose. (*)
See the chapter regarding maintenance and cleaning of your machine.
CHAPTER -6: OPERATING YOUR MACHINE
