Sharp EL-738XT Operation Manual Download

Page: 47 / 88

Basic operations

Refer to page 19 for basic variable operations.

Press

to clear the display.

• Make sure the calculator is in NORMAL mode.

Select bond calculations by
pressing

• To end bond calculations,

press

• If you press

during entry, any entered values will be

cleared.

Change the day-count setting, if necessary, by pressing

Enter the coupon rate (%) into COUPON (PMT) by entering
the value and pressing

Enter the redemption value into REDEMPT (FV) by pressing

, entering the value, and pressing

Enter the date of bond purchase into M-D-Y 1 (or D-M-Y 1)
by pressing

, entering the date, and pressing

• For date entry, refer to page 47, ”Entering dates”.

Enter the redemption date into M-D-Y 2 (or D-M-Y 2) by
pressing

, entering the date, and pressing

• For date entry, refer to page 47, ”Entering dates”.

Enter the number of coupon payments per year into CPN/Y
(N) by pressing

, entering the value, and pressing

To fi nd bond price or yield to maturity, do the following:

To obtain bond price (PRICE (PV)):

Enter annual yield (%) into YIELD(I/Y) by pressing

, enter-

ing the value, and pressing

. Move to PRICE (PV) and

calculate by pressing

and

. Display the accrued

interest (ACCU INT) by pressing

The accrued interest is

calculated automatically.

To obtain yield to maturity (YIELD (I/Y)):

Move to PRICE (PV) and enter the bond price by pressing

, entering the value, and pressing

. Move to annual

yield, YIELD (I/Y) and calculate by pressing

. Display

the accrued interest (ACCU INT) by pressing

. The

accrued interest is calculated automatically.

COUPON(PMt)=

000

Summary of Contents for EL-738XT

























































































Search results

Summary of Contents for EL-738XT

Reviews:

Related manuals for EL-738XT

Brands by name

Popular brands

Sharp EL-738XT, Operation Manual

Search results

Summary of Contents for EL-738XT

Reviews:

Related manuals for EL-738XT

Brands by name

Popular brands