3
OFF
•
P P•IC
ON
POWER SWITCH; PRINT / ITEM
COUNT MODE SELECTOR:
“OFF”: Power OFF
“
•
”:
Power ON. Set to the non print mode.
“P”:
Power ON. Set to the print mode.
“P•IC”: Power ON. Set to the print and item count
mode.
For addition or subtraction, each time
is
pressed, 1 is added to the item counter, and
each time
is pressed, 1 is subtracted.
•
The count is printed when the calculated
result is obtained.
•
Pressing of
,
clears the
counter.
Note: The counter has a maximum capacity of 3
digits (up to ±999). If the count exceeds the
maximum, the counter will recount from zero.
ROUNDING SELECTOR:
Example: Set Decimal Selector to 2.
4 ÷ 9 = 0.444 ... , 5 ÷ 9 = 0.555 ...
OPERATING CONTROLS
Note: The decimal point floats during successive
calculation by the use of
or
.
If the decimal selector is set to “F” then the answer
is always rounded down ( ).
GT
•
RATE
SET
GRAND TOTAL / RATE SETTING MODE
SELECTOR:
“GT”: Grand Total
“
•
”: Neutral
“RATE SET”: Rate setting
•
Enter the adding tax rate, then press
.
•
A maximum of 4 digits can be stored (decimal point
is not counted as a digit).
•
Only one rate can be stored. If you enter a new
rate, the previous rate will be cleared.
F 6 3 2 1 0 A
DECIMAL / ADD MODE SELECTOR:
“6 3 2 1 0”: Presets the number of decimal places
in the answer.
“F”: The answer is displayed in the floating decimal
system.
4
9
5
9
0.45
0.56
5/4
0.44
0.56
0.44
0.55
EL-2901RH(ACO)-Eng
03.4.28, 7:57 AM
3
