·
A. Drive pulley side
Adjust the "–" of the character belt to the position of the hole (mark).
("–" shown in the above arrangement of characters)
·
B. Driven pulley side
Adjust the center of the space of the character belt to the position of
hole (mark).
4. Note for disassembly and assembly
4-1. Disassembly of upper / lower cabinets
1) Hold the bottom housing and push down the upper housing at
circled 1 and slide the upper housing outwards.
2) Do the same at circled 2 and then 3.
4-2. Tightening torgue value
1) Key PWB : 1.5 0.2kg
2) Lower case : 2.5 0.5kg
Cutout
Driven pulley
Hole(mark)
1
2
3
1
2
2
4
5
6
3
1
2
4
5
6
3
UPPER CASE
UPPER CASE
LOWER CASE
3 x 8
