27 |
P a g e
1.
Set the decimal selector as specified in each example. The
rounding selector should be in the “5/4” position unless
otherwise specified.
2.
The grand total/rate setting mode selector should be in the
“•” position (off) unless otherwise specified.
3.
The print / item count mode selector should be in the “P”
position unless otherwise specified.
4.
Press
twice prior to beginning any calculation.
5.
If an error is made while entering a number, press
or
and enter the correct number.
6.
After entering a value, press
,
or
to activate
the Cost/Sell/Margin Calculation mode. In case of performing
different calculation tasks,
key must be pressed twice
first to cancel the Cost/Sell/Margin mode.
7.
Example procedures are listed in following manner unless
otherwise specified.
PRINTING DATE AND TIME
EXAMPLE: When on October 20, 2008, 1:52:00 p.m.
*1: If the date is not shown on the display, press
to show the
date.