manualshive.com logo in svg

Sharp e-Copy ShareScan OP 3.0, Configuration Manual

Share
Download
Sharp e-Copy ShareScan OP 3.0 Configuration Manual Download Page 45

eCopy ShareScan OP Configuration Guide 

|

 39

Managing the Windows driver (for embedded 
clients)

This section applies only to eCopy-enabled devices with embedded clients. It is intended for 
developers.

The Windows Simulator included with the eCopy ShareScan OP SDK uses the ShareScan OP 
Windows driver to simulate scanning.

To manage the driver:

1

In the console tree, right-click 

Devices

 > 

device_name

 > 

Manage

.

2

Under 

Manage ShareScan OP Driver

, click 

Advanced

 to specify additional driver options (see 

“Advanced driver settings (for embedded clients)” on page 39).

3

Under 

Driver

, start or stop the driver as needed.

4

Under 

Manager parameters

, which displays the host name or IP address of the manager to 

which the client is connected, enter the port number used for client-manager communication. 
The port number must match the port specified for the manager (see “To specify general 
properties:” on page 22).

5

Click 

Save

.

Advanced driver settings (for embedded clients)

Use the Advanced driver settings only when testing or troubleshooting. 

Do not enable these options 

in a production environment

.

The following settings are available:

■

Scan File

 — Select this option to enable test mode (for testing only). This enables you to 

configure ShareScan OP for testing without an attached scanner. When configured this way, 
ShareScan OP uses a TIFF file on the local hard drive to simulate the scanning process.

■

File (TIFF)

 — Enter the full path and file name of the TIFF file to use (multi-page Group 3 or 

Group 4 TIFF files are supported). 

■

Logging

 — Select this option to enable driver logging -- for testing only, and only if eCopy 

Technical Support asks you to do this. This option records all client-manager transactions in a 
log file on the client computer.

Summary of Contents for e-Copy ShareScan OP 3.0

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands