- 33 -
EN
You also can change the video output setting directly by
pressing buttons on the remote control.
This function is useful when you select the video output
setting wrongly and cannot see the picture correctly.
1. Open the disc tray by pressing
OPEN/CLOSE
.
2. Press
TIME
.
3. Then press the following number buttons to change the
video output.
7-8-4 To S-VIDEO
9-8-8 To Y/PB/PR
7-4-2 To RGB
7-7-6 To PROGRESSIVE
AUDIO SETUP
Note: It is not possible to connect speakers directly to this
unit; an AV amplifier must be used.
COMPRESSION:
Boosts frequency response .This item can be selected
between OFF and MAX.
LPCM OUTPUT:
This item can be selected as LPCM 96K or LPCM 48K.
LANGUAGE SETUP
OSD LANGUAGE:
You can select the default OSD language of the player
menus.
AUDIO:
You can select the default audio language if supported by
the DVD disc.
SUBTITLE:
You can select the default subtitle language if supported
by the DVD disc.
DISC MENU:
You can select the DVDs disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.