54
Stereo recording and playback
NOTE:
When playing HiFi cassette tapes recorded on another VCR, the
sound output may be distorted. This is normal and no indication
of a unit malfunction. Try to minimise sound distortions by using
TRK (TRACKING) +/–
or change to MONO by pressing of
AUDIO SELECT
.
Bilingual playback
performed as follows:
On-screen indications
(for 4 sec.)
Stereo playback
performed in:
Simultaneously
both languages
from HiFi track
(Mixed sounds)
Original sound
track (Sub sound)
One's mother
tongue dubbing
(Main sound)
One's mother
tongue dubbing
(Main sound)
Stereo
Mono
Right channel
signal output from
both loudspeakers
Left channel signal
output from both
loudspeakers
L CH
HI-FI
R CH
HI-FI
MONO
STEREO
HI-FI
NICAM OFF
NICAM M1/2
NICAM M1
NICAM ST
NICAM programmes are divided
into 4 types as shown below.
NICAM STEREO
broadcast
“NICAM ST” illumi-
nates when a
NICAM STEREO
broadcast signal is
received.
NICAM MONO A
broadcast
“NICAM M1” illumi-
nates when a
NICAM MONO A
broadcast signal is
received.
NICAM MONO A B
broadcast
“NICAM M1/2” illu-
minates when a
NICAM MONO A
and MONO B
broadcast signal is
received.
NICAM OFF
This will be dis-
played if a NICAM
signal is received
when “NICAM OFF”
is selected in the AV
SETUP MENU.
This VCR/DVD is capable of recording
sound in Hi-Fi system. The recording will
be performed automatically. NICAM
STEREO broadcasts are recorded in its
original sound system regardless of the
setting. If you wish to record NICAM
programmes, select NICAM
“AUTOMATIC” at “NICAM”
-
setting on
page 24.
And, this VCR/DVD can also receive and
record German A2 stereo program. The
tape recording is always both in HiFi and
in MONO on the standard longitudinal
track. In case of bilingual TV programs
always the two audio channels will be
recorded (only in case of tape or DVD-
RW VR recording).
STEREO
BILINGUAL
German A2 stereo sound reception:
Stereo program indication
It will be displayed for approx. 4
seconds when stereo programs
are being received.
Bilingual program indica-
tion
It will be displayed for approx.
4 seconds when bilingual pro-
grams are being received.
Playback
Use
AUDIO SELECT
to select under stereo/mono or bilingual
playback. See the table below for more information.
NOTE:
The sound indications of STEREO/BILINGUAL/etc. are displayed
automatically for about 4 seconds on the TV screen in the VCR
mode. In the DVD mode they cannot be displayed, so please
press
DISPLAY
to check the sound indications.
2E90601A[E] P42-55
10/12/04, 2:43 PM
54
Summary of Contents for DV-RW250X
Page 2: ......
