Sharp DV-L88W Operation Manual Download Page 92

Page: 92 / 117

SPECIAL

FUNCTIONS

Repeat Playback

C D

VIDEO

C D

Track/Disc repeat

Example: To repeat play a disc

While a disc is playing, press

(REPEAT)

twice to flash “

” on the

screen and then press

(PLAY)

to start

repeat play.

• To cancel repeat play, press

(REPEAT)

again. This clears the

“

” indicator from the display.

• To perform track repeat playback, press

(REPEAT)

once during playback to

flash “

” on the screen and then press

(PLAY)

• You cannot use repeat play with PBC (playback control) play of a PBC VIDEO CD.
• You may not be able to use repeat play with some discs.
• You cannot use repeat play in combination with programmed play.

DVD

C D

VIDEO

C D

A-B repeat

Press

(REPEAT)

three times.

• This displays “

” (repeat) indicator.

When play reaches the start point of the
scene, press

(PLAY)

• This registers the location at the start

point (A).

When play reaches the end point of the
scene, press

(PLAY)

again.

• This starts A-B repeat from the start

point (A) to the end point (B).

• To cancel A-B repeat, press

(REPEAT)

again. This clears the

“

” indicator from the display.

• The start point and end point must be inside the same chapter.
• A-B repeat cannot be used with some multi-angle functions (see page 83).

• A-B repeat is cancelled whenever you press

(STOP)

TITLE

, or

MENU

DVD

VCD

Summary of Contents for DV-L88W






















































































































Search results

Summary of Contents for DV-L88W

Reviews:

Related manuals for DV-L88W

Brands by name

Popular brands

Sharp DV-L88W, Operation Manual

Search results

Summary of Contents for DV-L88W

Reviews:

Related manuals for DV-L88W

Brands by name

Popular brands