Sharp DV-620S, Operation Manual, Page: 21 / 75

19
GB
SETTING UP
■
Digital Connection
Connection
DIGITAL IN
OPTICAL COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL OUT
AV OUT
VIDEO
S-VIDEO
RGB
S-VIDEO
OUT
OUTPUT
SELECTOR
VIDEO
OUT
AUDIO
OUT
L
R
Required cable
Coaxial digital cable (commercially available)
Optical digital cable (commercially available)
or
You can make this connection
using either a coaxial digital
cable or an optical digital cable.
DVD Player
To coaxial
DIGITAL OUT jack
To OPTICAL
DIGITAL OUT
jack
or
To coaxial
digital input jack
To optical
digital input
jack
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
Audio equipment with
optical/coaxial digital input jack
Digital Connection to an MD to Record a CD
Some Audio CDs and VIDEO CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
■
Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD or VIDEO CD
Play the disc as you normally would, with the audio mode set to “L+R” (see page 65). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.