XV-Z3100U/XV-Z3100/XV-Z3300/DT-510
4 – 1
XV-Z3100U
Service Manual
CHAPTER 4.
ELECTRICAL ADJUSTMENT
[1] ELECTRICAL ADJUSTMENT
Check items
No.
Adjusting point
Adjusting conditions
Adjusting procedure
1
EEPROM
initialization
1. Turn on the power (with the lamp on) and
warm up the set for 15 minutes.
•
Make the following settings.
Press S6213 to call the process mode and execute
"SS2" on SS menu.
2
Model setting
(Process menu)
1. Select the following group and subject.
Group: CONFIRM
Subject: MODEL-SELECT
1. Set as below.
XV-Z3100 : 1 (default)
XV-Z3300 : 2
DT-510 : 0
3
Adjustment of CW index
1. Signal input: Send 256 STEP color bar to
INPUT5.
(SVGA60Hz or XGA60Hz)
2. Select the following group and subject.
Group: ADJUST CW/Auto KS
Subject: CW-INDEX.
1. Adjust the lamp gradation patterns of RGBW so
that smooth patterns without noise appear.
4
R/G/B contrast adjustment
(manual or automatic)
1. Select the following group and subjects.
Group : ADJUST/AD
Subject : R-CONT
G-CONT
B-CONT
(Process GAMMA interlock)
2. Feed white signal with the amplitude level
of 96% (0.67Vpp) to INPUT5.
(SVGA60Hz or XGA60Hz)
1. Measure chromaticity of the 96% white wind pattern
using CA100.
2. On the screen where bit dropouts occur, raise the
values of R/G/B-Contrast. Adjust the values so that
bright red, green, and blue bit dropouts appear on
a black background; and amounts of change in x
value of R and y values of G/B become 100/1000
or more.
3. If adjustment is performed manually watching the
screen, make adjustment so that bright red, green,
and blue bit dropouts appear on more than half of
the screen.
5
White balance adjustment
1. Feed the component 75% gray signal to
INPUT5.
2. Select the following group and subjects.
Group : ADJUST
WB
Subject : R-GAIN
B-GAIN
1. So that the following chromaticity values are
obtained using CL200.
X value: 298
±
5
Y value: 319
±
5
Adjust R-GAIN and B-GAIN
No.
Adjusting point
Adjusting conditions
Adjusting procedure
1
Adjustment of Component offset
1. Feed 10-step signal with 480P component
100% amplitude.
2. Select the following group and subjects.
Group : ADJUST/AD
Subject : C-R-OS
C-B-OS
(Process GAMMA interlock)
1. Check the fixed value.
C-R-OS : 257
C-B-OS : 256
2
Adjustment of DLP Brightness
1. Select the following group and subject.
Group : CONFIRM/DLP
Subject :R-BLK
G-BLK
B-BLK
(Process GAMMA interlock)
1. Check the fixed value.
Fixed value : 252
3
Video Contrast adjustment
1. Feed NTSC 100% wind pattern signal.
(Signal with burst)
2. Select the following group and subjects.
Group : CONIRM/VIDEO
Subject : V-CONT
1. Check the fixed value.
Fixed value : 134
R
G
B
W
Summary of Contents for DT-510
