Sharp CV-P09FX, Service Manual

Page: 1 / 48

CHAPTER 1. PRODUCT SPECIFICATION
[1] SPECIFICATION............................................ 1-1
[2] ELECTRICAL
PARTS .................................... 1-1
[3] WIRING DIAGRAM ........................................ 1-2
[4] EXTERNAL DIMENSION............................... 1-2
CHAPTER 2. OPERATION INSTRUCTION
[1] PART NAMES ................................................ 2-1
[2] LOCATION ..................................................... 2-2
[3] INCLUDED..................................................... 2-3
[4] INSTALL WINDOW PANEL ........................... 2-3
[5] INSTALLATION AND REMOVAL OF EX-
HAUST HOSE................................................ 2-4
[6] PRE-OPERATION CHECKS.......................... 2-5
[7] OPERATION MODE ...................................... 2-5
[8] DRAINAGE .................................................... 2-7
[9] MAINTENANCE ............................................. 2-7
CHAPTER 3. DISASSEMBLING PROCEDURE
[1] PROCEDURE FOR DISASSEMBLY ............. 3-1
[2] DISASSEMBLING THE CONTROL BOX ........ 3-9
CHAPTER 4. EXPLANATION OF CIRCUIT AND OP-
ERATION
[1] ELECTRONIC CONTROL CIRCUIT DIA-
GRAM ............................................................4-1
[2] PRINTED WIRING BOARD...........................4-2
[3] FUNCTION ....................................................4-3
[4] PERFORMANCE
CURVES...........................4-6
CHAPTER 5. ATTENTION WHEN REPAIRING
[1] HOW TO REPAIR REFRIGERATION ...........5-1
[2] ELECTRICAL COMPONENT TEST ..............5-3
CHAPTER 6. TROUBLESHOOTING GUIDE
[1] TROUBLESHOOTING ..................................6-1
REPLACEMENT PARTS LIST
SERVICE MANUAL
CVP09FX
S3503CVP09FX/T
PORTABLE AIR CONDITIONER
CV-P09FX
MODEL
SHARP CORPORATION
CONTENTS
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
In the interests of user-safety (Required by safety regulations in some countries)
the set should be restored to its original condition and only parts identical to
those specified should be used.