Sharp CP-MP60F Operation Manual Download

Page: 28 / 32

05/1/28

XL-MP60(U).fm

TINSEA043SJZZ

XL-MP60

ced Fea

tures

Enhancing your system

The connection cord is not included. Purchase a commercially avail-
able cord as shown below.

Listening to the playback sounds from VCR,
DVD, etc.

Note:
To prevent noise interference, place the unit away from the televi-
sion.

Headphones

Before plugging in or unplugging the headphones, reduce the vol-
ume.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

VCR, DVD, etc.

To the line
output jacks

Red

RCA cord
(not supplied)

White

Red

White

Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.

When using video equipment, connect the audio output to this
unit and the video output to a television.

Press the ON/STAND-BY button to turn the power on.

Press the VIDEO/AUX button.

Play the connected equipment.

Summary of Contents for CP-MP60F

































Search results

Summary of Contents for CP-MP60F

Reviews:

Related manuals for CP-MP60F

Brands by name

Popular brands

Sharp CP-MP60F, Operation Manual

Search results

Summary of Contents for CP-MP60F

Reviews:

Related manuals for CP-MP60F

Brands by name

Popular brands