Sharp CP-DK225, Service Manual

Page: 10 / 75

XL-DK255
3 – 1
CHAPTER 3. MECHANICAL DESCRIPTION
[1] Removing And Reinstalling The Main Parts
1. CHANGER MECHANISM SECTION
Perform steps 1, 2, 9 and 10 of the disassembly
method to remove the CD changer mechanism.
1.1 How to remove CD Disc (See Fig. 1-4)
1. When CD is at play position (Figure 1), rotate
reduction gear C clock-wise as shown in Figure 2
until disc tray is at stock position, then rotate further
to eject the disc tray so that CD can be removed
from the tray.
2. In another case, if CD mechanism is at tray No.1
play position and to remove CD located in tray No.3,
the procedure is as follows:
If the gear up down board is located at tray No.1
position, then rotate gear clock-wise until it is at
stock postiiton. Rotate reduction gear D clockwise
(Figure 3) to move the CD mechanism to tray No.3
position. This is confirmed by checking the gear up
down board position by the marking as indicated on
the main chassis as shown in Figure 4.
CD Disc
CD at play position.
CD at stalk position.
CD Disc
Disc Tray
Guide Tray
Reduction gear C
Front Rear
Figure 1
Figure 2
Reduction gear D
Up Down
Mark 1
(DISC 1)
Mark 3
(DISC 3)
Mark 5
(DISC 5)
Mark 2
(DISC 2)
Mark 4
(DISC 4)
Gear up down board
Figure 3
Figure 4