HK
TIMER/
SLEEP
Timer set indicator
POWER
ON/
STAND-BY
MEMORY/
SET
TUNING/
TIME
( )
CD
TUNER
(BAND)
VIDEO/
AUX
TAPE
(1 2)
<P=001>
HOW TO USE THE BUILT-IN TIMER
3
4
5
■
Timer playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND), TAPE (1
V
2) or VIDEO/AUX
button to select the desired function.
3
Press the TIMER/SLEEP button repeatedly until "
f
PLAY" is
displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour
start time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, then the timer set
indicator will light up and finally the "
f
PLAY" will be disap-
peard.
6
When the preset time is reached, the volume will increase
gradually until it reaches the volume you were listening to
before turning off the unit.
7
If you select CD or TAPE, the power will be turned off after
the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.
Note:
●
When performing timer playback using an external unit con-
nected to the VIDEO/AUX jacks, only the power of the main
unit will be turned off automatically. (The power of the external
unit will not be turned off.)
■
Timer recording
1
Press the ON/STAND-BY button to turn the power on.
●
Load a cassette for recording into the TAPE 2 cassette com-
partment.
2
Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function.
3
Press the TIMER/SLEEP button repeatedly until "
f
REC" is
displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour start
time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, and the timer set
indicator will light up.
6
When the preset time is reached, the timer recording will start.
●
The volume will increase gradually until it reaches the volume
you were listening to before turning off the unit.
7
When the recording tape reaches its end, the timer recording
will end, and the power will be turned off.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
●
Once the time is set, the setting will be retained until a new
time is entered.
●
Before setting the timer, make sure that the clock
setting is correct. (Page 12)
(Main unit operation)
TIMER/
SLEEP
Timer set indicator
POWER
ON/
STAND-BY
MEMORY/
SET
TUNING/
TIME
( )
TUNER
(BAND)
VIDEO/
AUX
3
4
5
(Main unit operation)
CD-PC3500(SEC) TINSE0281AWZZ
19
