Sharp CD-G10000, Service Manual

Page: 7 / 140

CD-G10000/CP-G10000S
2 – 2
[3] TEST MODE
•
Setting the test mode
During stand-by mode, press ON/STAND-BY button while pressing
down the
button and X-BASS/DEMO button. then, press the CD
button to enter the test mode.
IL isn’t done
OPEN/CLOSE operation is using manual. IL isn’t done
<< >>,<< >>buttons make pick's slide possible.
IL isn’t done
to page 2-3
<<PLAY>> key input.
C D T E S T
A
Do TOC IL. Do normal play.
When these following key is input into PLAY key, track num-
ber can be appoint directly. <<MEMORY>>
key input.
<< 1 >> key: Track 4
<< 2 >> key: Track 9
<< 3 >> key: Track 15
Adjustment result automatically will
display as below for each 2 sec:
a) “FOF_XXXX”
b) “TOF_XXXX”
c) “TBAL_XX”
d) “TGAN_XX”
f) “FGAN_XX”
g) “RFLS_XX”
––––––––
<<STOP>> key input.
STOP
explanation:
a) Focus off set
= “FOF_XXXX”
b)Tracking off set = “TOF_XXXX”
c)Tracking balance = “TBAL_XX”
d)Tracking Gain = “TGAN_XX”
f) Focus Gain = “FGAN_XX”
g) RF level shift = “RFLS_XX”
VOL — Last memory
P.GEQ — FLAT
X-BASS — OFF
To cancel: Power OFF
jomi