03/1/28
CD-E650E(A)3.fm
27
CD-E650E
Adv
a
nced F
eatures
!
Timer playback or timer recording
Before setting timer:
1
Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 15.)
2
For timer playback:
Load a cassette or discs to be played.
For timer recording:
Load a cassette for recording in the TAPE 2 cassette compart-
ment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE (1 2) button to se-
lect the desired function.
To select the timer playback source:
Press CD, TUNER (BAND) or TAPE (1 2).
To select the timer recording source:
Press TUNER (BAND).
When you select the TUNER (BAND), tune into the desired
station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer
playback or timer recording.
Display the white " " for timer playback and the red " " for
timer recording.
White
Red
5
Press the TUNING/TIME ( or ) button to specify the hour
to start, then press the MEMORY/SET button.
The illustrations show the timer playback setting.
6
Press the TUNING/TIME ( or ) button to specify the min-
utes, then press the MEMORY/SET button.
The unit will enter the timer stand-by mode automatically.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode
after the playback. If you select TUNER, it will enter the stand-
by mode one hour after the timer playback starts.
In timer recording:
When the recording tape reaches its end, the timer recording
will end, and the unit will enter the stand-by mode.
