03/2/17
CD-E250E(E)2.fm
12
CD-E250E
Pre
p
aration
for Use
System connections (continued)
!
To mount the surround speakers on the wall
Caution:
The speaker may fall if mounted improperly. Check the stability of
the wall thoroughly. Sharp is not liable for accidents caused by poor
wall stability or improper mounting.
!
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
"
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
"
Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
!
Demonstration mode
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
!
To turn the power on
Press the ON/STAND-BY button to turn the power on.
The design of the sur-
round speakers allows
them to be hung on the
wall. Be sure to use the
type and size of screw
that is shown to the right.
1
Make a hole in the wall using
a drill.
2
Drive a wall mount plug into
the hole using a hammer.
Drive the wall mount plug in
until it is flush with the wall
surface.
3
Drive one screw into the wall
mount plug for each speaker.
Drive the screws, so there is
about a 5 mm (3/16") space
between the wall and the head
of the screw.
4
Mount the surround speaker
on the wall so that the screw
head is inserted into the slot
on the surround speaker.
5 mm (3/16")
3.2 mm (1/8")
Min. 22 mm (7/8") 9 mm (3/8")
32 mm (1-1/4")
8-9 mm (3/8")
Wall mounting
screw
Wall
surface
Wall
surface
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
